Keralit Hoof Hardener storage pack

Keralit Hoof Hardener is a liquid solution that stabilizes and strengthens proteins naturally occurring in the hoof horn, particularly the structural protein keratin. As the main component of the horn, keratin molecules form increased new bonds with neighboring molecules and protein chains, while existing bonds are protected by an embedded active ingredient. The result is a decisive increase in the strength and abrasion resistance of the hoof horn, without impairing the hoof mechanism or the natural moisture balance. Keralit Hoof Hardener does not leave a waterproof coating like many other hoof care products, such as UV varnishes, adhesives, oils, or even grease.

Keralit Hoof Hardener stabilizes the keratin molecules directly on the surface of the horn, resulting in a stabilized horn layer thickness of approximately 0.4 to 0.5 mm in healthy hooves (see also Vet. med. Diss. B. Monhart, Zurich 2002). Due to its low-viscosity formula, Hoof Hardener can penetrate cracks and crevices more easily. This prevents further horn degradation processes, even under covered horn damage, such as beneath a horseshow.

Consequently, only the horn directly exposed to abrasion or harmful substances such as ammonia, bacteria, and fungi is stabilized. Unnatural hardening of the horn or dehydration, which would reduce the elasticity of the hoof capsule, does not occur.

Please observe the instructions for use on the packaging. The following instructions are not a substitute for these. If you lose them, we will be happy to send you new instructions for use. Alternatively, you can simply download the instructions for use (in the national languages DE, EN, ES, FR, NL, PL, SWE, DK, IT) for the hoof hardener under the menu item "Downloads".

The Keralit Hoof Hardener is applied to the hoof with the enclosed bristle brush. For barehoofed horses, it is applied from below to the weight bearing edge, the white line and, if the horse is sensitive, also to the sole. Brush in from the side approx. ¼ to ⅓ of the hoof wall height.

For shod horses, brush the hoof wall up to and including the nail holes. The Hoof Hardener should be able to penetrate into the old nail holes in particular and run under the shoe. The sole of the hoof can also be treated if necessary. This can replace the use of insoles and leather soles.

Treatment is usually carried out 1 to 2 times a week. In the case of severe horn decomposition or wet weather, the hoof hardener can also be used 3 to 4 times a week.
Bottle with 250ml, sufficient for approx. 3 to 4 months (warmblood, barehoof). For shod horses up to 6 months.

The question of use on damp horn is very common.
The hoof hardener can also be used on moist horn without any problems. However, the absorption capacity of the horn is then limited, so that more frequent application, but with less hoof hardener, is advisable. Application to soaking wet or freshly greased hooves is less advisable.